Mecon Water Saver is a retrofit variable flush Mechanism developed to Save Water and Reduce Water Bills.
The device can be DIY fitted in a toilet cistern in less than five minutes.
Converting your toilet from a Single Flush to a Variable Flush toilet with the Mecon Water Saver puts you in control of the water you use.
The device is simply fitted by lifting the lid of the cistern, drilling a small hole in the siphon and fitting the unit.
No plumbing is required. Not even the water has to be turned off. Fitted in less than 5 minutes. When the toilet is flushed, the user simply presses a button to stop the flush when the toilet bowl is cleared.
 
Benefits

• Can be fitted on both older and newer toilets
• Fitted in the spare handle hole
• Full fitting instructions supplied with kit
• Fitting can be on the front or side of the cistern
• No components are below water level, no danger of limescale or other contaminants
• No water passes through the unit, only air to stop the flush
• Payback in under 6 months