Product Sections
Other Information
Best Sellers
Thermilate Insulating Paint Additive Single Pack - 500g
Chimney Balloon - Sizes to fit all chimneys - Stops Chimney Draughts
CHIMNEY BALLOON MOUTH INFLATION TUBE - 2 FEET
NIGHTLIGHT NL-IS with INFRARED MOVEMENT SENSOR
R63
DROUGHTBUSTER RAIN WATER DIVERTER - FOR CAST IRON DOWNPIPES
Lighting & Energy Audits
Doctor Energy - Save | Lighting & Energy Audits
Reduce Lighting Costs by up to 50%{SUMMARY}
DISTRIBUTION BOARD CONTROL
The unit is for standard magnetic ballast fluorescent and other discharge lighting such as sodium, mercury and metal halide, which saves power consumption by up to 30%+ with an imperceptible effect on light levels. Fitted at or near the main distribution board, the control units are easily installed into existing lighting circuits and no modification is required to the existing light fittings.
BENEFITS
Save up to 30% on your power consumption
Easy to install in existing buildings
Existing light fittings do not require modification
No disruption to working environment
Life of fluorescent tubes & lamps extended by 25%+
Reduced maintenance costs
Reduction in costs of Climate Change Levy
2 year full replacement Warranty
{HOW IT WORKS}
The unit supplies mains voltage for ignition. It allows a short time delay period for lamp warm-up to ensure stable operation of the lights, before switching to a lower energy saving voltage. Each unit comes factory set to reduce the voltage by 15% for maximum savings, however for certain types of lamps a 12.5% or 10% reduction may be selected. Single or multiple lighting circuits and mixed lamp types can be controlled by a single unit making it very versatile and economic to install.
During operation, the unit continuously monitors the variation in the output of the current and mains voltage. When additional lights within the circuit are switched on, the unit will revert back to mains voltage for ignition and wait for the current to stabilize before returning to the Energy Saving Mode.
PLUG & SAVE FOR INDIVIDUAL LIGHTS
These easy to fit units transform existing Switchstart and Quickstart luminaires into T5 or T8 high frequency lighting units, so you can benefit from:-
Achieve impressive energy savings by the combined efficiency gains of HF replacement of standard electromagnetic ballasts plus new high efficiency tubes, giving proven energy savings of up to 45%.
Your investment is massively reduced because the capital cost of conversion of existing lighting units is a mere fraction of the alternative expense of a programme of full luminaires replacement.
They are super-simple to install - quick non-disruptive installation is both economical and user-friendly, minimising premises down-time and avoiding the need for highly qualified electricians and all the engineering problems of new attachments and re-wiring.
Just Plug them In
The units simply plug into existing Switchstart and Quickstart luminaires, transforming them electronically from conventional fittings to high frequency ballast fittings of correct type and size to accept high-efficiency T5 and T8 fluorescent tubes.
Exploit latest Lamp Technology
The conversion units enable you to install inew T5 and T8 high frequency tri-phosphor tubes into existing luminaires. These give a light output equivalent to that of older tubes at dramatically lower electrical consumption.
Generate major Energy and Cost Savings
The reduced ballast losses of high frequency operation combined with new high efficiency fluorescent tubes give energy savings of up to 45% in existing installations.
Super Simple to Install
You simply slide the ballast converter and end-cap adaptor onto the ends of a T5 lamp and change the luminaire starter to the replacement provided. Then, remove the T8 lamp and just plug in the T5 assembly.
{BENEFITS}
Low Initial Cost
Trouble-Free Fitment and Operation
Extended Tube Life Halved
Maintenance Demands
Dramatic Electricity Savings
Outstandingly Rapid Payback
To find out more, please call us on 01753 631069 or email us at info@doctorenergy.co.uk. |
 |
FastTrack Energy Audit{SUMMARY}A FastTrack energy audit from Doctor Energy will effectively show you where energy savings can be achieved, quickly and easily.
The audit is delivered in an easy to understand, clear and concise graphical format, highlighting how savings can be achieved through the installation of a range of products designed specifically to automatically and discreetly reduce energy consumption whilst raising overall awareness of energy usage.
Our team work closely with key stakeholders to define the scope of the audit to ensure specific requirements are fully understood and incorporated into the FastTrack audit so that all goals and expectations are met, on-time and within budget.
As well as auditing power, lighting, heating usage the FastTrack audit can be tailored to specific environments such as warehousing, Server Rooms, Boiler installations, Refrigeration equipment etc.
The goal of the FastTrack audit is to ensure that REAL savings are achieved in short timeframes and the ROI (Return On Investment) is a key metric by which our mutual success will be measured.
{DETAILS}The FastTrack Audit highlights:
Where and how Energy is been used.
Where and how savings can be achieved.
Estimated savings by energy type and building location.
How to implement and maintain a energy awareness program.
What grants and other financial incentives are available to you to achieve your goals.
For example:
By automatically switching off devices in standby mode, reducing input current after 'start up' phase and other measures savings of up to 60% can be achieved in terms of energy cost.
By installing our, low cost, modular, lighting control systems customers are seeing 30% savings in terms of their lighting cost, fluorescent tube and lamp life extended by 25%+ (a significant cost saving in terms of both product and fitting costs), and a payback on the systems of between six and twenty four months depending on the individual tariff and usage pattern.
For larger installations intelligent control nodes can be deployed that use existing LAN (Local Area Network) cabling to produce real-time reporting of energy usage and optimisation in a graphical, PC based solution.
To find out more, please call us on 017953 631069 or email us at info@doctorenergy.co.uk.
|
|
Doctor Energy - Save | Lighting & Energy Audits
