LAMP MODULES

Plug and Play installs in seconds
Allows on/off and dim/bright control
These plug-in modules will allow you to remotely control plug-in table lamps, and other plug-in type lights.

There's no re-wiring to do. Simply set the X10 address, un-plug the lamp, plug the lamp into the module, and plug the module into your mains socket. You instantly have X10 control of the device.

The Lamp Module has a minimum rating of 60W, and a maximum rating of 300W. The Lamp Module is dimmable, and should only ever be used to control incandescent, or 12 V halogen lamps.

Use in conjunction with an X10 transmitter like a IR7243 , HomeVision , CM12U , Mini Timer , Maxi Controller , Mini Controller , or SM10 . You can also use an RF based solution ( HR10 , All-in-one remote , MS13 , KR19 , or SS13 ) as long as you also have a TM13 RF Receiver module.
Technical Information

Lamp module which fits into a standard bayonet lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands.
Fits into standard bayonet lamp holder.
No dial required for setting unit address.
Please note that this unit does not have any dimming functionality
et Up and Technical Specification