Mains Control

The Pow-R-Boot 5 allows you to toggle AC power OFF and ON to any remote device plugged into its five outlets.

Enabling you to set each plug to ON or OFF or Boot (OFF/ON).

Selectable short/long OFF cycle provides enough delay to boot any device.

Enables you to reboot your network equipment - routers, NTUs, remote-access servers - remotely via EnergyTracker.

Pow-R-Boot 5 is compact rackmountable for convenience at 1 RU of rack space.

Price on application.
Serial Cable required - Click Here For More Information

Control power to 10 remote devices - On, Off, or Toggle.

Advanced ON/OFF AC power control to reboot remote network devices. With this switch, you can shut down distant devices or power up dormant ones.

Speed: 2400, 9600 bps, switch-selectable
Indicators: AC Power On, Link Activity, Ready
Power: 240 VAC, 50 Hz
Size: 1.7 H x 5.5 W x 5 D (4.3 x 14 x 12.7 cm)
Weight: 2 lb. (0.9 kg)

Price on application.
Serial Cable required - Click Here For More Information

Daisychain satellite units over 2000 feet (610 m).

Install one master unit at your local management site. Then daisychain up to nine satellite units throughout your remote site for one-to-one AC power switching. Control each remote device via EnergyTracker.

Speed: 2400, 9600 bps, switch-selectable
Indicators: AC Power On, Link Activity, Ready
Power: 240 VAC, 50 Hz
Size: 1.7 H x 5.5 W x 5 D (4.3 x 14 x 12.7 cm)
Weight: 2 lb. (0.9 kg)

Price on application.
Serial Cable required - Click Here For More Information

Designed for applications where the controller manufacturer implements their applications using X10 Powerline control.

TTL control signals.

X-10 send and receive capability.

The Two-way PLC interface has been designed for controller manufacturers to implement X10 PLC control.

Enables EnergyTracker to utilise X10 control.

LED indication of power and X10 signalling.

Supply Voltage: 230V +10%-15%50Hz
Ambient Temperature: -10ºC to +40ºC

Price on application.
Serial Cable required - Click Here For More Information

On/Off function to control fluorescent light, air conditioner, fan, coffee pot, etc.

Designed to operate with 230V AC loads.

The appliance module is a receiver unit that works as a remote controlled switch or relay.

The connected load can be used at any wall sockets in the house.

The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 250W, halogen floor lamps with foot dimmer up to 500W or resistive loads of up to 16A (13A fuse fitted).

As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.

The load connected to the switch module can still be controlled locally by its own switch.

Price on application.

On/Off and dimming control of incandescent lighting.

Designed to operate with 230V AC 60W to 300W incandescent lamps.

The lamp module is a 300W receiver unit that works as a remote dimmer.

The connected lamp can still be switched on and off locally. The dimmer function, however, is an X-10 remote control.

The dimmer module can be used at any wall sockets in the house with incandescent lamps between 60W and 300W.

As the X-10 dimmer is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address.

The lamp connected to the dimmer module can still be controlled locally by its own switch.

Price on application.