Power Saving Devices

THE INTELLIGENT WAY TO POWER DOWN PERIPHERALS

Automatically powers peripheral equipment when the desktop computer is switched on.
Energy Saving Trust recommended
Powers all computer peripherals ON or OFF automatically
Pays for itself many times over
Provides high quality surge protection for your whole system
Simply PLUG-IN and SWITCH-ON
PC and Mac compatible
British Standards compliant

Lowest standby power of 0.4 watts.
Saves an average 35 watts per hour depending on the number of connected peripherals. This product can pay for itself in less than a year of use.
-Full range Auto Calibration - this unit will automatically determine the on and off power level of any desktop computer to automatically switch power to peripheral equipment only when the desktop computer is switched on and in use. A 5 second delay in powering peripherals on/off allows printers to park before power is shut down.

- Zero-crossing detection - Automatically determines when the power supplied to the peripherals is at an optimum level for creating the least amount of stress to components.
- Quality Surge Protection - will dissipate surges of up to 532 joules of energy/a peak current of 31,500 amps and includes thermal fuse in case of a catastrophic spike.
- Telephone/Modem/Broadband Surge Protection - High quality varistors give the best possible protection against surge.
- Telephone/Modem Splitter-one input line split into two, one for a telephone and one for a modem.
- Reaction Time approximately 5 seconds
- Total Maximum Power 13 amps. Maximum Master Socket Power 13 amps.
- Cable Length 2 Metres. - Telephone Cable Length 2 Metres.
- 2 Wall or desk mount lugs on the rear of the panel.
- Green neon indicates when the Master Socket is active and surge protection is functioning.
- Red neon indicates when the peripheral sockets are on.
- Plug & Play - No software required

Plug your laptop computer into the Intellipanel master socket, and the RJ12 cable into the USB port on your laptop computer.
For use with USB enabled devices such as Laptops.
Powers all laptop computer peripherals ON or OFF automatically.
British Standards compliant

Leaving electrical equipment on standby wastes energy, costs money and can reduce lifespan. When your computer is switched on, IntelliPlug™ automatically provides power to the monitor, printer, speakers, etc. via its patented Auto-Calibration™ system as well as providing surge protection for your whole system.

The laptop unit has an additional cable which connects to a USB port. This must be connected for the unit to work.


When the computer is turned off, IntelliPlug™ automatically switches off power from the peripherals, saving energy.

-Full range Auto Calibration - this unit will automatically determine the on and off power level of any desktop computer or hi-fi audio visual amplifier to automatically switch power to peripheral equipment only when in use.
- Surge Protection feature
- Lowest standby power of 0.4 of a watt saving an average 35 watts per hour depending on the number of connected peripherals. This product can pay for itself in less than a year of use.
- Reaction Time 5 seconds
- Enhanced Calibration Range
- Maximum Power 13 amps.

Exactly The Right Amount Of Water Every Time You Boil!

FREE PACK OF KETTLE KLEAR - WORTH £2.49 - KEEPS LIMESCALE AT BAY

The EcoKettle looks like a stylish electric jug kettle in appearance but it has a special feature that allows the user to fill the kettle to its maximum, but then allows them to boil one to eight cups according to their requirements.

"If everyone boiled only the water they needed to make a cup of tea instead of 'filling' the kettle every time, we could save enough electricity to run practically all the street lighting in the U.K."
Typical savings are 31% of energy used.
Recommended by Powergen. Good Housekeeping Institute Approved

3kW , Cordless , Illuminated on-off switch, Washable limescale filter, 230 Volts AC, 1.5 litre capacity, 12 months warranty

The revolutionary Tefal Quick Cup kettle that saves 65% Energy and is ready in just 3 seconds. It gives you hot or cold filtered water at a touch of a button. Press the red button, and within 3 seconds 220ml of water (about the capacity of a mug) is drawn up through an integrated filter, heated, and then dispensed, piping hot, direct into your cup. If you need more keep your finger pressed down on the button; if you want less, then press the button again.

The great advantage of this Tefal Quick Cup is that it only heats the water you need. According to Tefal it can save up to 65% energy, compared to an ordinary kettle. It also takes just 3 seconds to heat a mug of water.

Versatile...all your daily needs!
Plug it in
Fill the removable tank
Push the button for instant water
Straight to your cup!... Healthier water...
Water is also instantly filtered thanks to Claris cartridge
This removes impurities providing better tasting, healthier water and reducing limescale.
Programmable cup size
Energy saving...
You only heat and use the quantity you need.
Automatic Stop...
Hot water in just 3 seconds !
Opti-Quick technology exclusive to Tefal
Instant...
Hot water is available instantly , without preheating.
Instant hot and cold water

Capacity 1.5 litres
Dimensions H27.9 x W18.7 x D26.2cm
Wattage 2.8kW
Easy to fill and dishwasher safe
Hot filtered water in 3 seconds without preheating
Up to 65% energy saving compared to a standard kettle - Versatile for any hot or cold drink and snack
Serves directly in the cup
Cool touch exterior body Finish Black / Stainless steel

Automatic mug size function
Filters Concealed
One additional Claris water filter cartridge included in pack
Cartridge replacement indicator light
Water at room temperature
Automatic switch off
Non slip feet
Produces water at 85 degrees C - ideal for coffee and fruit teas. NB this is regarded as slightly too cold by black tea connoisseurs

Freezers and fridge/freezers are probably the single most expensive electrical appliance to run in the house. Fridge/Freezers cost on average between £55 - £65 per year.

This award winning product was developed in conjunction with the Department of Energy and will make typical savings in electricity running costs of 20% when fitted to your domestic refrigeration.

The SavaPlug simply replaces the existing plug on the fridge.

When the thermostat on the fridge switches on the motor to pump the refrigerant around the system full power is required to start the motor. However, once the motor is running full power is no longer needed.

The SavaPlug senses this and reduces the flow of electricity to match the actual requirements. When the red light glows savings are being made.

Is it approved?

Conforms to all relevant British and European standards and carries the CE mark.

Over 1/2 million devices are already in use saving money and helping the environment by reducing CO2 emissions.

10 year Guaranteee

The SavaPlug is British manufactured with solid state technology and comes with a 10-year guarantee*. This means that you can rely on making savings year after year. Savings amount to around £120.00 over the guarantee period. Not a bad investment - as well as over a tonne of CO2 saved from polluting the environment!

* 1 year standard guarantee, extendable to 10 years upon return of guarantee card within 60 days of purchase
Please Note: The SavaPlug is not suitable for appliances with electronic controls. Please click the Check Compatibility list or contact us to ensure your fridge is compatible.

The EPS Power Saver uses state of the art electrical technology to actively monitor and improve the power factor of your household appliances. In addition, the intelligent technology optimises the voltage and current demands thus reducing the active power / KWh demands and achieves around 10% to 20% savings on your electricity bill.
Choosing the model:
EPS188:Suitable for use in any premises where the monthly electricity usage is between 300 KWh - 1000 KWh per month.
EPS388: Suitable for use in any premises where the monthly electricity usage is between 1000 KWh - 2500 KWh per month

It also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies load with proper voltage during momentary power surges.
10-20% Reduction on your electricity bill

10% - 20% reduction in your electricity bill.
Plugs into any socket. No re-wiring needed.
Suitable for homes, shops, restaurants and offices.
No maintenance required.
Rapid return on your investment.
Two Year 1-1 exchange warranty.
Fully compliant with safety standards.
Environmentally friendly.
Weight: 500 gm
Size:126 x138 x 80 mm (5 x 5.5 x 3")
Not available for US and Canada customers

The EPS Power Saver uses state of the art electrical technology to actively monitor and improve the power factor of your household appliances. In addition, the intelligent technology optimises the voltage and current demands thus reducing the active power / KWh demands and achieves around 10% to 20% savings on your electricity bill.

It also acts as a voltage stabilizer by storing energy for up to 10 seconds and therefore supplies load with proper voltage during momentary power surges.

Installation of the Power Saver could not be easier. Just plug the unit into any 13 Amp socket on your premises and that’s all you need to do.
For a safe and reliable operation, EPS recommends that the unit should be plugged into a wall socket and not an extension lead. The device can store energy for up to 10 seconds after it is switched off, therefore wait for at least 10 seconds between switching off the mains and un-plugging the device.

Specifications: Weight:500 gm Size:126X138X80 mm (5x5.5x3 inches)

The EPS Power Saver unit offers a minimum of 10% reduction in your electricity bill from day 1, therefore saving you money. The amount of reduction depends upon the type of load and the usage pattern. On average our customers have genuinely seen the following savings.

10% - 15% savings in residential premises.
15% - 20% savings in business and commercial premises.

The EPS Power saver unit can be returned within 2 months of purchase, if our product does not deliver the savings we promise. A proof of purchase is required.

The money back guarantee is invalid if:
· The returned Power Saver has visible damage caused by misuse, neglect or tampering with the unit.
· The serial number has been removed from the Power Saver.
Warranty
The Power Saver unit comes with a 24-month 'new for old' warranty, covering any manufacturing or material defects.

Will the Power Saver unit definitely reduce my electricity bill
EPS offer a unique money back guarantee, which proves to our customers how confident we are about our product.

The Power Saver unit will definitely reduce your electricity bill. Based on customer feedback and extensive tests, savings between 10 – 20% have been recorded under normal conditions. The %age savings will depend upon the type of load and the consumption. In some cases, savings above 20% have been recorded, especially in shops and offices.

Does the Power Saver require any maintenance?
No. Simply plug the Power Saver unit on your premises and start saving money.

Do I need to make any changes to the electrical wiring?
No. The Power Saver is designed as a Plug & Play device. Simply plug the unit into a13 Amp socket on your premises. EPS recommends that the power saver should be plugged into a wall socket, not an extension lead.

Which Power Saver model is suitable for my use?
The Power Saver unit has two models. The EPS 188 model is suitable for residential use, for up to a 4 bedroom home. The EPS 388 is suitable for larger homes, schools, offices, schools, shops and restaurants.

Is the Power Saver unit suitable for use in a 3 phase systems?
Yes. The EPS 388 model is suitable for use in a 3-phase system. However, for a 3-phase system, only our qualified electricians can carry out the installation of the EPS 388 Power Saver unit. Please contact our customer services team, who will be happy to assist you with your requirements. Please note that EPS 388 is not suitable for heavy-duty industrial load or monthly consumption exceeding 6000 KWH.

How long will it take to recover the cost of buying a Power Saver unit?
Based on customer feedback and field-testing, the original investment on the Power Saver can easily be recovered in 4 - 6 months, therefore allowing you to enjoy additional savings for years to come.

Is the Power Saver unit safe?
Yes. The Power saver unit is built to the highest possible manufacturing standards.

Q12: Do I leave the Power Saver Unit ‘switched-on’ continuously?

Ans: Yes. The Power Saver unit should be left 'Switched ON' continuously to achieve the maximum savings. EPS recommend that the unit should be switched off during long periods of inactivity, for example, when going abroad on holiday, or if the premises are closed for long periods of time.

Please note that the Power Saver unit can store energy for up to 10 seconds after it is switched off, therefore wait for at least 10 seconds between switching off the mains and un-plugging or relocating the device.



Q13: Can the Power Saver unit be wall mounted?

Ans: Yes. The user manual has detailed instructions for the wall mounting preparation.



Q14: Is the Power Saver environmentally friendly?
Yes. Power Saver helps improve the environment by minimising the amount of reactive power which otherwise is wasted in distribution networks, cables and your appliances in the form of heat.

This product is suitable for any type of Car, Van, Boat, Bus or Generator.
It is equally effective for unleaded, leaded, diesel and LPG fuel..
The EPS Fuel Savers utilise a special 3 tier technology to improve the combustion of hydrocarbon fuels. They can be easily installed in minutes without any changes or modifications to the fuel pipe or engine.
12% - 20% savings on fuel consumption (guaranteed).
15% - 30% reduction in CARBON emissions.
25% - 35% reduction in HC emissions.
Reduced engine vibrations and improved performance.
Rapid return on investment.
No alternations to the engine or the fuel line.
Simple one time installation.
Environmentally friendly.

The installation of the EPS Fuel Saver is very easy. Simply clip the Fuel Saver on to the fuel line, close to the fuel injector rail, and secure it in place (at both ends) using the cable ties provided. Please see 'Installation' section for further clarification.

The EPS Fuel Saver is a fuel economiser and pollution reduction device which utilises magnetic hydrodynamic technology to improve the combustion of hydrocarbon fuels. Mostly, engine combustion is incomplete due to the molecular clusters of hydrocarbon fuel. In normal cases, only about 70% of the total burnt fuel provides the real power, with 30% of the fuel wasted and carbonised.

The EPS fuel saver is the solution to this problem. When the fuel is passed through the fuel saver, the hydrocarbon molecules are temporarily ionised and create positively aligned molecules (P.A.M). The ionised hydrocarbon fuel results in a complete combustion when in contact with the negative oxygen (air-fuel mixture).

The growing population of motor vehicles contributes to air pollution worldwide. Our field trials clearly indicate that the Fuel Saver can help in reducing up to 30% of carbon and other toxic emissions.

Weight: 120 grams Size: 67x45x48 mm (2.6x1.7x1.8 inches)

The construction of EPS Fuel Savers is based on the most up-to-date information on the treatment of fossil fuels by magnetic fields and detailed tests are regularly conducted in co-operation with various interested parties. Only the best materials and the most efficient and user-friendly designs have been chosen for these products.

The EPS Fuel Saver offers a minimum of 10% - 15% reduction in your fuel bill from day 1. The amount of saving will increase as the vehicle is driven and de-carbonised, which is usually about 400 miles after the installation of the fuel saver. The amount of fuel saving also depends upon the usage pattern. On average our customers have genuinely seen the following savings:

Minimum 10% - 15% savings from day 1 (in cities)
12% - 20% savings on long routes and motorways.

The EPS Fuel Saver unit can be returned within 1 month of purchase, if our product does not deliver the savings we promise. A proof of purchase is required.

Designed for Motorbikes and Smaller Cars
This product is suitable for motorbikes, smaller cars or any other type of engine with a capacity of up to 1.5 litres. It is equally effective for unleaded, leaded and diesel fuel.

The EPS Fuel Savers utilise a special 3 tier technology to improve the combustion of hydrocarbon fuels. They can be easily installed in minutes without any changes or modifications to the fuel pipe or engine.
12% - 20% savings on fuel consumption (guaranteed).
15% - 30% reduction in CARBON emissions.
25% - 35% reduction in HC emissions.
Reduced engine vibrations and improved performance.
Rapid return on investment.
No alternations to the engine or the fuel line.
Simple one time installation.
Environmentally friendly.

The installation of the EPS Fuel Saver is very easy. Simply clip the Fuel Saver on to the fuel line, close to the fuel injector rail, and secure it in place (at both ends) using the cable ties provided. Please see 'Installation' section for further clarification.

The EPS Fuel Saver is a fuel economiser and pollution reduction device which utilises magnetic hydrodynamic technology to improve the combustion of hydrocarbon fuels. Mostly, engine combustion is incomplete due to the molecular clusters of hydrocarbon fuel. In normal cases, only about 70% of the total burnt fuel provides the real power, with 30% of the fuel wasted and carbonised.

The EPS fuel saver is the solution to this problem. When the fuel is passed through the fuel saver, the hydrocarbon molecules are temporarily ionised and create positively aligned molecules (P.A.M). The ionised hydrocarbon fuel results in a complete combustion when in contact with the negative oxygen (air-fuel mixture).

The growing population of motor vehicles contributes to air pollution worldwide. Our field trials clearly indicate that the Fuel Saver can help in reducing up to 30% of carbon and other toxic emissions.

Weight: 60 grams Size: 45x38x30 mm (1.7x1.5x1 inches)


The construction of EPS Fuel Savers is based on the most up-to-date information on the treatment of fossil fuels by magnetic fields and detailed tests are regularly conducted in co-operation with various interested parties. Only the best materials and the most efficient and user-friendly designs have been chosen for these products.

The EPS Fuel Saver offers a minimum of 10% - 15% reduction in your fuel bill from day 1. The amount of saving will increase as the vehicle is driven and de-carbonised, which is usually about 400 miles after the installation of the fuel saver. The amount of fuel saving also depends upon the usage pattern. On average our customers have genuinely seen the following savings:

Minimum 10% - 15% savings from day 1 (in cities)
12% - 20% savings on long routes and motorways.

The EPS Fuel Saver unit can be returned within 1 month of purchase, if our product does not deliver the savings we promise. A proof of purchase is required.

Designed for LPG and LNG applications
This product is suitable for household boilers, generators and other gas based domestic appliances. It is equally effective for Gas, LPG and LNG.
The EPS Fuel Savers utilise a special 3 tier technology to improve the combustion of hydrocarbon fuels. They can be easily installed in minutes without any changes or modifications to the fuel pipe or engine.
12% - 20% savings on fuel consumption (guaranteed).
15% - 30% reduction in CARBON emissions.
25% - 35% reduction in HC emissions.
Reduced engine vibrations and improved performance.
Rapid return on investment.
No alternations to the engine or the fuel line.
Simple one time installation.
Environmentally friendly.

The installation of the EPS Fuel Saver is very easy. Simply clip the Fuel Saver on to the fuel line, close to the fuel injector rail, and secure it in place (at both ends) using the cable ties provided.

The EPS Fuel Saver is a fuel economiser and pollution reduction device which utilises magnetic hydrodynamic technology to improve the combustion of hydrocarbon fuels. Mostly, engine combustion is incomplete due to the molecular clusters of hydrocarbon fuel. In normal cases, only about 70% of the total burnt fuel provides the real power, with 30% of the fuel wasted and carbonised.

The EPS fuel saver is the solution to this problem. When the fuel is passed through the fuel saver, the hydrocarbon molecules are temporarily ionised and create positively aligned molecules (P.A.M). The ionised hydrocarbon fuel results in a complete combustion when in contact with the negative oxygen (air-fuel mixture).

The growing population of motor vehicles contributes to air pollution worldwide. Our field trials clearly indicate that the Fuel Saver can help in reducing up to 30% of carbon and other toxic emissions.

Weight: 60 grams Size: 45x38x30 mm (1.7x1.5x1 inches)

The construction of EPS Fuel Savers is based on the most up-to-date information on the treatment of fossil fuels by magnetic fields and detailed tests are regularly conducted in co-operation with various interested parties. Only the best materials and the most efficient and user-friendly designs have been chosen for these products.

The EPS Fuel Saver offers a minimum of 10% - 15% reduction in your fuel bill from day 1. The amount of saving will increase as the vehicle is driven and de-carbonised, which is usually about 400 miles after the installation of the fuel saver. The amount of fuel saving also depends upon the usage pattern. On average our customers have genuinely seen the following savings:

Minimum 10% - 15% savings from day 1 (in cities)
12% - 20% savings on long routes and motorways.

The EPS Fuel Saver unit can be returned within 1 month of purchase, if our product does not deliver the savings we promise. A proof of purchase is required.

Save Resources, Energy and Money with Powersafer®

70%! That is the amount of power you continue to use when you turn your products to standby.

Power Safer is the only product that can eliminate this cost when connected to a tv, dvd player, games console or hi-fi. The only requirement is that each product has an on/off switch and a remote control.

Products left on standby continue to wear out and it is estimated that Power Safer will extend the life of products connected to it by eighteen months. The savings in electricity mean you will save the original purchase price time and time again. If you include the increased life of your products Power Safer is a must have product. It is simple to connect and is plug and play. You have all the convenience of use by remote control and you never need to unplug products again.

Ease of use: After a few seconds the powersafer separates the sytsem in the stand-by-mode from the power supply. By this, the powersafer saves your money and energy. Once you use your remote control, the Powersafer® reconnects the energy supply.

Television:
Consumption of electricity of an average TV 15 W
Consumption of electricity of the POWER SAFER® PS 1.1 < 0,3 W
Stand-by-time of TV 20 hours/Day
Reduction of energy consumption with PS 1.1 107 kWh/Year
Price of energy £0.09 £/kWh
Saved money with PS 1.1: £9.6

Hi-Fi up to £38 per annum
Just put the it between the socket and the audio/video -system.

Measures approx 15 x 5 x 7.5 cm

The PS3.m is suitable for colour tv with on/off switch, dvd player with on/off switch, games console and hi-fi/home theatres. You can extend the unit simply by using a multi block connected to the socket end.

Automatically switches off a range of Audio Visual applications and eliminates standby power wastage. Includes Lightning and Surge protection.

When you forget to turn off at the switch the PSX does it for you - automatically.

With the new PSX you can save even more by connectiong other peripherals using an extension block (not supplied). The load must not exceed 480W.


The average household can have up to 12 gadgets left on standby or chargiung at any one time. With the new PSX you have the convenience of using your remote control and never need to unplug at the wall or switch off products again. In doing so you could save up to £40 per annum on yoiur electricity bill

240V 50/60Hz
Power Consumption <0.5W
Switching capacity approx 480W



Surge protection built in

Change the way you charge - forever!

You know what it's like. You're away from home, nowhere near your car, you haven't got your mains powered charger with you (which is fine because you don't have access to a wall socket anyway!) and your mobile phone has just run out of battery power (again). Or maybe your iPod has just played its final tune…

Simply use the included mains adaptor to fully charge the PowerMonkey and you will get up to 96 hours standby on your mobile phone, 40 hours on your iPod, 6 hours on your Sony PSP, 2 full charges on your PDA plus it's original charge and up to 1600 pictures on your digital camera! The PowerMonkey will even hold its charge without leakage for up to a year!


The universal mains charger will work in over 150 countries and has inter-changeable heads for UK, US, Australia and Europe.

PowerMonkey comes with:
1 x PowerMonkey Unit
1 x Universal Mains adaptor
Adaptor for Nokia and Mini Nokia, Motorola V66, Samsung A288, Siemens C25 and Sony Ericsson wide connector
1 x Mini USB for Motorola Razr V series, Blackberry and Bluetooth headsets
1 x USB for iPod, smart phones, PDA and other devices
1 x Connector for Sony PSP and most digital cameras
1 x Black travel pouch

PowerMonkey features 2 LEDs;
1) PowerMonkey Charging: flashes red when PowerMonkey needs charging, shows red whilst charging and green when fully charged.
2) Device Charging: flashes green when discharging to device and red when low battery voltage.

Single-Use Battery Regeneration

When a battery is used the positive and negative electrodes get covered with a deposit. This eventually stops the battery from delivering power. The Souvenir Cranwell solution removes this deposist so the battery can fully function again.

Rejuvenates Dead Standard Alkaline AA and AAA Batteries
Can rejuvenate the same battery up to 100 times
Can rejuvenate completely dead batteries
Can rejuvenate up to 4 batteries at a time either AA or AAA or a mix of the 2.
Patented Technology (allows the battery to be rejuvenated up to 100 times and to 95% of its original power)
Low power consumption! Costs less than a tenth of a penny to rejuvenate a single battery!
Typically would have paid for itself within 8 weeks of use!

Single-use alkaline batteries use only a fraction of their potential, the rest left unusable. Recharging these batteries can be dangerous and is never to be recommended. This new technology can reliably and safely regenerate “dead” batteries. Nothing is added to the batteries. They are not recharged but regenerated in a way that releases the potential that is already there.
It does this by perfecting the internal structure of the cell.

The benefits to the environment are clear to see. Annually over 30,000 tons of single-use batteries are thrown out with the domestic rubbish in the UK. Only a tiny percentage of this volume is actually collected for recycling, involving the extraction of component materials such as steel. What is more, there are no established facilities in the UK to effectively reprocess this unpleasant waste and collected batteries are shipped abroad. It is the consumer that pays for this costly exercise, in the high retail price for batteries.

Souvenir Cranwell’s solution can reduce the volume of waste many times over and presents considerable savings. The process of regenerating a single battery involves a cost of less than a tenth of a penny and a battery can be regenerated for as long as there is potential to be released. Our tests have shown that a single battery can be regenerated up to a hundred times and with each process the battery is returned to up to 95% of its original state.

The refresher uses patented technology which is based on a Thomas Edison patent of 1922.
Thomas Edison discovered that the main reason why alkaline batteries becomes discharged is the accumulation of impurities and foreign matter on and in the positive electrode and the coating of the active material with a scale or crust which seriously impairs the efficient operation of cell.
Edison’s patent regenerates the positive electrode elements by thoroughly cleaning them thereby bringing them back to their original state and efficiency. To clean the electrodes Edison took them out of the battery and put them into a boiling mixture ofglycerine, water and caustic soda for 72 hours. The electrodes were then replaced into the battery which then became live.
Souvenir Cranwell Regenerator replicates this process by thoroughly and gently cleaning the electrodes and creating a big number of areas free of sulphatation at the electrode-electrolyte
interface over an average 72 hour period but does it inside the battery itself. This process is absolutely safe and dos no damage to the battery. Nothing is added to the battery; it just releases the potential that is already there. One battery can be regenerated up to 100 times. Capacity of regenerated batteries depends on manufacturer, discharge and storage conditions. Our and our customers’ tests show that most of the alkaline batteries, for example Duracell Plus, Duracell Ultra, Segasa Evolution, Energizer Ultra, many own brand batteries such us Morissons, Tesco etc. can be regenerated up to 95% of its original capacity.
Power consumption of Regenerator is very low and cost of regeneration is less than a tenth of penny.
Souvenir Cranwell Regenerator can also regenerate some nonalkaline batteries. For example Heavy Duty Single-Use batteries (Panasonic Special, Sky and etc) can be regenerated up to 60% of its original capacity. Titanium batteries (Energizer E2) can be regenerated up to 80% of its original capacity.

1- makes batteries perform better and uses their full potential
2- saves you money
3- helps the enviroment

Input Voltage: 100-240V DC 50-60Hz
Output Voltage: 1.8V DC per channel
Output Current: 35mA max. per channel

Airfree® TSS™ technology uses heated air to destroy airborne mould, bacteria, viruses, dust mites, and pollen allergens. It is a great product for people living with allergies, asthma, or other respiratory conditions.

This revolutionary new air sterilizer from AirFree is "the world's safest and most tested air purifier" according to the manufacturer.

It removes mould, bacteria, tobacco, ozone, viruses, odours, dust mites, pollens and pet dander from the air, and destroys it safely and effectively,meaning that it is of particular benefit to allergy sufferers, and users have reported great benefits from using this particular air steriliser.

Unlike conventional air purifiers, which simply trap pollutants in filters, the Airfree destroys them with the 250ºC ceramic heating core. The Airfree’s technology is much more effective than anything else on the air purifier market today. The exclusive TSS Technology destroys 99.9% of all micro-organisms in the air, so you can be sure that the air you are breathing is as pure as possible.

Despite the air being heated to 250ºC, the air returned to the room after sterilisation is not noticeably warmer, due to the cooling chambers through which the air must pass before being released.

The AirFree has none of the ongoing costs of traditional air purifiers, as there are no costly HEPA filters or UV bulbs to replace. The unit was designed for 24/7 usage without a jump in energy consumption, and with a power usage of just 48 watts, it uses around the same amount of energy as a single lightbulb.

The Most Tested Air Purifier
Not only the most tested air purifier, but the most successfully tested. Here is why;
Airfree's exclusive patented Thermodynamic Sterilising System (TSS™) technology has been independently tested in “real life” working environments by world renowned institutions and ISO 17025 laboratories in six different countries including the USA, Sweden and Germany. These tests prove that Airfree® totally destroys up to 99.99% microorganisms that pass through its patented TSS™ no matter how small or hazardous they might be.
Airfree® offers a detailed copy of the independent tests on its website www.airfree.com assuring consumers of Airfree's outstanding efficiency in drastically reducing airborne microorganisms such as
Mould spores
Viruses
Bacteria
Pollens
Dust mite remains, excrement, and allergens
Organic odors
Ozone
Pet Dander

The Safest Air Purifier
1. Airfree® emits no ozone. Airfree® TSS™ technology generates dangerous emission, NO ions, NO UV Light and NO ozone. In fact, independent tests in laboratories in Sweden demonstrate that Airfree®
actually reduces ozone by 26%. Ozone is a toxic gas that according to the Environmental Protection Agency can trigger asthma and destroy lung tissue.
2. No need to change dirty contaminated filters nor to clean dirty blades preventing contact with contaminated materials. A huge benefit for people with allergies, asthma, or other respiratory conditions. Airfree’s exclusive TSS™ technology completely destroys and eliminates all organic contaminants, all microorganisms, as well as its
harmful elements including their bio-toxins.
Most microorganisms, such as mould spores, remain a great threat even after they have been killed, as their bio-toxins remain active. It is important to choose an air purifier that destroys ALL of these harmful elements. Airfree® is proven 99,99% effective in destroying all microorganisms.

Will one Airfree® unit be powerful enough for my room?
One Airfree® is powerful enough to purify the air in rooms up to 258 sq. ft. for P60
model, 344.4 sq ft for P80 model and 550 sq ft for P125 model .
If the room is larger, more Airfree® units should be added proportional to the room size.
How does Airfree® work?
Airfree® is the ONLY proven technology on the market that fully destroys and neutralizes mould spores, dust mite allergens, viruses, bacteria, pet dander, organic allergens, and ozone. Airfree® works by drawing air through tiny ducts into its patented TSS™ incineration chamber where up to 99.99% of microorganisms are incinerated.
Poisonous gases like ozone are there destroyed as well. The heat used in Airfree® has no noticeable effect on the temperature of the room.
How much does Airfree® cost to run?
Very little! Remember, Airfree® has no expensive Hepa filters or UV bulbs to replace. Replacement filters for other air purifiers can be expensive. Airfree® has none of these ongoing costs, and is designed to operate 24 hours a day, 7 days a week, consuming less than a 50W light bulb which is quite insignificantcompared to the 200W Hepa filters used in other air purifiers.
How can I be sure that Airfree® really works?
Please remember that Airfree® is probably the only air purifier manufacturer offering detailed copies of independent tests in real life conditions, in large rooms occupied by people, assuring Airfree’s outstanding efficiency in drastically reducing airborne microorganisms. These independent tests can be seen at www.airfree.com

P60
Capacity: 258 sq. ft. (24m2)
Electric consumption: 45W
Voltage: 110 - 240V
Dimensions: height 10.4 in (26.5 cm) and diameter 8.4 in (21.5) cm
Noise level: Completely silent.
Weight: 2.4 lbs (1.09kg)
P80
Capacity: 344.4 sq. ft (32m2)
Electric consumption: 48W
Voltage: 110 - 240V
Dimensions: height 10.4 in (26.5 cm) and diameter 8.4 in (21.5) cm
Noise level: Completely silent.
Weight: 2.4 lbs (1.09kg)
P125
Capacity: 550 sq. ft (51m2)
Electric consumption: 50W
Voltage: 110 - 240V
Dimensions: height 10.4 in (26.5 cm) and diameter 8.4 in (21.5) cm
Noise level: Completely silent.
Weight: 2.8 lbs (1.27kg)

Ozone Free Certified
The Swedish National Testing and Research Institute has tested Airfree® and verified that it emits absolutely NO amount of Ozone. As a matter of fact, Airfree® even reduces the amount of this toxic gas by 26%.
Ozone, which is emitted by many air cleaners currently on the market, is a noxious lung irritant that can, even in small amounts trigger allergic reactions.
Bacteria and Mould Reduction Certified
Destroys 99.99% of all microorganisms including any type offungi and spores, virus and bacteria. According to independent laboratory tests the average airborne mould and bacteria reduction from Airfree® is 85% to 95% in areas up to 450 sq ft. All the tests were realized in “real life” conditions, not in small and closed chambers.
Allergen Reduction Certified
Independent tests performed in Cambridge-UK verified Airfree’s ability to very effectively control the hazardous airborne house dust mite allergen Derp 1.