TOILET CISTERNS

An award winning water saving device that retrofits to your existing WC cistern.

Converts low level siphonic front handle cisterns to variable flush which allows you to use only the amount of water required to clear the pan. Water savings of up to 47% are achievable. This is much more than any other system. WRAS approved

Saves the maximum possible amount of water, nothing can beat the 'Interflush™'. The user stops the flush just as soon as the pan is clear. Zero amount of water is wasted. Using any less water would mean the toilet needs flushing again.

The most cost effective way to save water. Very short payback time measured in weeks not years. No need to buy a new toilet suite or even a new siphon.
Simply fits on top of siphon, no need to even turn the water off.
Can be fitted in less than half an hour.
Has a guaranteed 'trailing volume' with unique adjustment to increase this volume for troublesome drain lines, thereby eliminating drain line blockages associated with existing low volume flush devices.
Designed to fit the maximum number of different siphons and cisterns with front mounted handles. Much easier and simpler than any other device to use. Just press, HOLD until clear, let go (all in one hand operation).

Lifetime Guarantee. If, at ANY time, a part should fail, simply return for a free replacement.

A Mecon Water Saver is a retrofit variable flush Mechanism developed to Save Water and Reduce Water Bills. The device can be DIY fitted in a toilet cistern in less than five minutes. Converting your toilet from a Single Flush to a Variable Flush toilet with the Mecon Water Saver puts you in control of the water you use.

The device is simply fitted by lifting the lid of the cistern, drilling a small hole in the siphon and fitting the unit. No plumbing is required. Not even the water has to be turned off. Fitted in less than 5 minutes.

When the toilet is flushed, the user simply presses a button to stop the flush when the toilet bowl is cleared.

Other features
* Can be fitted on both older and newer toilets
* Fitted in the spare handle hole
* Full fitting instructions supplied with kit
* Fitting can be on the front or side of the cistern
* No components are below water level, no danger of limescale or other contaminants
* No water passes through the unit, only air to stop the flush

If your Water Bill is £400 or more, at a cost of £17.50 for a Mecon Water Saver you could have your money back in less than 6 months and continue saving Water, Money and the Environment